ReadyMadeRC
ZEISS CINEMIZER HEADTRACKER
| http | //www.inreal-tech.com/ |
ReadyMadeRC
QUADRIXETTE 40 FRAME - BLACK (NO ARMS)
| Disclaimer | Arms are NOT included, please order them separately. |
The features in short:, Same concept as the Quadrixette 30 (and Nano), just bigger. this means, Now with the bigger diameter comes the following in addition:,
After months of intensive testing and lots of prototypes and ...ReadyMadeRC
PICO FPV COMBO (5.8 GHZ)
Package Includes:, , Camera Choices:, RMRC Pico V2 Camera (, Antenna Choices:, TrueRC Nano 5.8 RHCP Antenna, Altitude RC 5.8 Transmitter and optional True RC 5.8 Nano Antenna:,
This is a customizable combo for those looking for high ...ReadyMadeRC
AIMDROIX EVO ONE - Y6
| - Frame size | 610mm (with extended length arms) |
| -Max props size | 16in on top motor / 15in props on lower motor. |
Frame configurations:, The frame was designed to be as customizable as possible so that it could be built in many different multirotor configurations. The default frame configuration is a Y6 but it can be built as a quad, quad X8, Y4, V- tail quad and tricopter. This is possible by just installing the optional configuration kits sold separately., Main Frame and landing gear:, The top and bottom plate are stiffened with an innovative aluminum beam stiffeners, which increase the stiffness of the frame plates without the need of standoffs or sandwiched plates. This maximizes the space between the top and bottom plates for a better placement of the ESC and batteries. The integrated landing gear increases the stiffness of the bottom plate and allows two high capacity batteries to be mounted on the sides of the frame. The height of the landing gear can be easily changed by replacing the 8mm carbon fiber leg tubes., Camera mounting system:, The innovative camera mounting system was designed to provide vibration isolation for the camera and video transmitter electronics. The camera plate is mounted on 6 AIMDROIX soft dampers that the takes away the vibrations from the props and motors. The rear support dampening balls are mounted on the top plate brackets so that they are in compression load. This allowed mounting the camera gimbal and FPV camera on front of the plate, away from the top and bottom props view and maintain the plate parallel with respect to the frame plates. The plate was designed to fit the Feiyu Tech FY-G3 brushless gimbal without modifications., Designed for the Aimdroix Aluminum Arms:, The frame was designed to fit the AIMDROIX aluminum arms that have been well proven for many customers around the world. With the optional AIMDROIX arms accessories, it possible to build the most versatile multirotor frame in the market., Key Features:, -Innovative vibration isolated camera system., Y6 Specs:, -Aprox frame,
Aimdroix EVO ONE Y6 The AIMDROIX EVO ONE is the ...ReadyMadeRC
AIMDROIX EVO ONE - QUAD/X8 MULTIROTOR FRAME
| - Frame Size | 615mm (with extended length arms) |
| -Max props size | 14in |
| - Battery space between plates | 220mm x 53mm x 37 m |
Frame configurations:, The frame was designed to be as customizable as possible so that it could be built in many different multirotor configurations. The default frame configuration is a Y6 but it can be built as a quad, quad X8, Y4, V- tail quad and tricopter. This is possible by just installing the optional configuration kits sold separately., Main Frame and landing gear:, The top and bottom plate are stiffened with an innovative aluminum beam stiffeners, which increase the stiffness of the frame plates without the need of standoffs or sandwiched plates. This maximizes the space between the top and bottom plates for a better placement of the ESC and batteries. The integrated landing gear increases the stiffness of the bottom plate and allows two high capacity batteries to be mounted on the sides of the frame. The height of the landing gear can be easily changed by replacing the 8mm carbon fiber leg tubes., Camera mounting system:, The innovative camera mounting system was designed to provide vibration isolation for the camera and video transmitter electronics. The camera plate is mounted on 6 AIMDROIX soft dampers that the takes away the vibrations from the props and motors. The rear support dampening balls are mounted on the top plate brackets so that they are in compression load. This allowed mounting the camera gimbal and FPV camera on front of the plate, away from the top and bottom props view and maintain the plate parallel with respect to the frame plates. The plate was designed to fit the Feiyu Tech FY-G3 brushless gimbal without modifications., Designed for the Aimdroix Aluminum Arms:, The frame was designed to fit the AIMDROIX aluminum arms that have been well proven for many customers around the world. With the optional AIMDROIX arms accessories, it possible to build the most versatile multirotor frame in the market., Key Features:, -Innovative vibration isolated camera system., QUAD Specs:,
Aimdroix EVO ONE Quad The AIMDROIX EVO ONE is the ...ReadyMadeRC
FY-91Q NAVIGATION EDITION WITH COMPASS AND GPS
,
FY91Q MULTI ROTOR SYSTEM Basics on how the system works: ...ReadyMadeRC
FY-30A ORANGE INERTIAL FLIGHT STABILIZATION SYSTEM
,
GREAT NEW FEATURE! The FY30A can now also control multi-rotor ...ReadyMadeRC
TINY 5V REGULATOR
IMPORTANT:, This tiny regulator using a LDO chip and converts the voltage difference to "heat". Regulator chip including a thermal shutdown on 125 degree Celsius and it can handle 800mA current easily if you can cool it. We are suggesting to maximum, : 7-18V (2-4S LiPO), : 5 volt, : 500mA nominal 1A ma, : 0.65gr,
This tiny 5volt regulator perfect for your 5volt FPV cameras ...ReadyMadeRC
FY-30A PRO INERTIAL FLIGHT STABILIZATION SYSTEM
| • Any other configuration inquiries, please email us | feiyudz@yahoo.cn. |
| Includes | FY30A module |
FY30A has an integrated three-axis gyro and three-axis accelerometer which controls the aircraft movement in three-dimensional space. By using your remote control, the unit can be turned on or off for the following functions:, - Level flight – When stabilization is activated, the FY-30A will automatically control the aircraft for smooth easy flying. For beginners in RC aircraft flying, this is advantages as it makes flight easier and increases the student pilot self-confidence. The system can be activated throughout the entire flight duration, from take off to landing., The FY30A can be used in the following fixed wing models:, • Traditional layout fixed-wing aircraft with Aileron, Elevator and Rudder, RC Radio suitability:, The FY-30A has been tested to work well with the following RC system:, • Robbe-Futaba PPM / PCM 1024 / PCM G3 mode, 2.4G systems, The FY-30A can be operated in three flight modes modes:, - Mode 1: FY-30A Deactivated Mode. In this mode, the FY-30A stabilization function is turned off. The aircraft is completely under the control of the pilot., - Mode 2: 3D Control Mode. In this mode, the balancer utilizes its 3-axis gyroscope to sense roll velocity and flight attitude. If no input is given by the pilot (sticks in the middle position) the FY30A will lock the current aircraft attitude. This prevents rolling of the aircraft at the axial plane and maintains its current posture. Therefore the aircraft can be easily maneuvered to complete a variety of 3D flight with added stability and smoothness., - Mode 3: Auto Stabilization mode. In this mode, the FY-30A will automatically command the aircraft control surfaces to maintain level flight at all times.,
GREAT NEW FEATURE! The FY30A can now also control multi-rotor ...ReadyMadeRC
FY-901 MULTI-ROTOR FLIGHT STABILIZATION CONTROLLER
| mail us | service |
The FY-901 for multi-rotor copter can be used in the following models:, , :, , The FY-901 has been tested to work well with the following RC system:, , The FY-901Operating Mode for multi-rotor copter supports two flight modes :, , 1: Auto-Stabilization mode., : 3D Control Mode., Gyroscope initialization (re-setting):, , Out of the box, the FY-901 has been fully initialized. However, if the following condition occurs, resetting the gyro is recommended:, , NOTE:,
Introduction FY-901 has integrated three-axis gyro and three-axis accelerometer, which ...ReadyMadeRC
FY-DOS INERTIAL ATTITUDE STABILIZER WITH GPS
INCLUDES:, , IMPORTANT: The GPS receiver uses 5V, and therefore the DOS system outputs 5V to power the GPS receiver. Feiyu GPS receivers made for other models, and most other GPS receivers, use a lower voltage and will be damaged if you connect them to the DOS., New function:, , The latest firmware for Multi-rotor flight system is V2.0 can realize the following functions:, , For more detail:, FY-DoS for multi-rotors control manual,
DoS is an aeromodelling balancing instrument designed for a variety ...ReadyMadeRC
FY-DOS INERTIAL ATTITUDE STABILIZER
Included in this version:, , IMPORTANT: The GPS receiver uses 5V, and therefore the DOS system outputs 5V to power the GPS receiver. Feiyu GPS receivers made for other models, and most other GPS receivers, use a lower voltage and will be damaged if you connect them to the DOS., New function:, , The latest firmware for Multi-rotor flight system is V2.0 can realize the following functions:, ●, For more detail:, FY-DoS for multi-rotors control manual,
DoS is an aeromodelling balancing instrument designed for a variety ...ReadyMadeRC
READY MADE RC 2 AXIS CAMERA GIMBAL FOR GOPRO HERO3, 3+
| Working Voltage | 7v-17v, 2-4s lipo (12v Standard) |
| Overload Protection | 0.8A |
| Overload Protection Time | 600s (After 600s, gimbal will stop working automatically) |
| Max Torque | 330us |
| Weight | 178g |
Specifications:, , Customer Video:,
Introducing the Ready Made RC 2 Axis Gimbal for GoPro ...